Raspberrypi.dns

apt-get install bind9-doc bind9 dnsutils

/etc/resolv.conf

# Generated by resolvconf
domain lummerland
#nameserver 192.168.115.25
nameserver 192.168.115.46

/etc/network/interfaces

# interfaces(5) file used by ifup(8) and ifdown(8) 

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

auto eth0
iface eth0 inet static
 address 192.168.115.46
 netmask 255.255.255.0
 gateway 192.168.115.115

/etc/bind/named.conf.options

options {

directory "/var/cache/bind";

// If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113

// If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder.

forwarders { 192.168.115.115; 192.168.115.116; };

       notify no;

//======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto;

auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; };

};

Rechte

chmod 644 db.*
systemctl start bind9

Test

resolvconf -l

dig @pi3x00 orgamon.org